Creating transition points in the virtual tour

๐Ÿค–
6 Mar, 2012 serjjj
6 Mar, 2012 # Re: Creating transition points in the virtual tour
Hi Guys, please tell me how to solve this problem: I want to create a virtual tour via Pano2VR and put it on your site, downloading a few panoramas and creating a transition point in the end get a few files in a format ready SWF.Prosmatrivayu tour in flash pleere- there is no problem! But how to download these several related SWF file to the site do not know, because in the idea when downloading a single file reference is that I insert into your website for future viewing! ((((Even tried to do similar in Tourweaver`e in finally get a single file format SWF- what you need, but (for example, 6000 * 3000) when loaded into this program panoramas higher resolution, the result of the tour turns horrible! it feels as if you become short-sighted๐Ÿ™‚ please help. Thank you!


6 Mar, 2012 nikolas
6 Mar, 2012 # Re: Creating transition points in the virtual tour
serjjj, had a similar problem with Pano2VR, change paths to local absolute, strangely enough did not help me ... In the end, tried and it worked Tourweave: http://www.remoklass.ru/uslugi/dizajn-interera/galereya/ -LYUKS-palata v-rodilnom-dome.html http://www.remoklass.ru/uslugi/dizajn-interera/galereya/kvartira-na-ul.-kompozitorov.html http://www.remoklass.ru/uslugi /dizajn-interera/galereya/komnata-v-klassicheskom-stile.html After working with these two programs, I concluded that the e-Tourweaver virtual tours to make faster and more convenient than Pano2VR. It includes modest functionality From Tourweaver program minuses, but I it is enough for the moment. With regard to short-sightedness. You may need to remove the check mark in the Slice display publish settings -> Flash VR.


6 Mar, 2012 serjjj
7 Mar, 2012 # Re: Creating transition points in the virtual tour
nikolas, thank you so much for your help and please tell me in what resolution you render the panorama for tours?


6 Mar, 2012 nikolas
7 Mar, 2012 # Re: Creating transition points in the virtual tour
Render in 8000h4000. But in order to view is not loaded eternity, before opening in Tourweave are converted to jpeg with a decrease in quality, and in parallel to reduce the resolution 6000h3000. I try to view a weighing 1-1.5 mb. Although, maybe it's a lot ๐Ÿ™‚


6 Mar, 2012 serjjj
7 Mar, 2012 # Re: Creating transition points in the virtual tour
With regard to short-sightedness: Slice display a check mark in the publish settings -> Flash VR.byla removed, apparently the problem is drugom.Poprobuyu throw in Tourweaver rendering with a resolution like that happened tebya.Napishu๐Ÿ™‚ Thanks again for the help!


6 Mar, 2012 serjjj
12 Mar, 2012 # Re: Creating transition points in the virtual tour
Found out ... It turns out that I downloaded Tourweaver panorama resolution 6000h4500 and had 6000h3000๐Ÿ™‚.) Conclusion: Myopia is treated !!!๐Ÿ™‚๐Ÿ™‚๐Ÿ™‚


13 Mar, 2012 Denis
13 Mar, 2012 # Re: Creating transition points in the virtual tour
Serjjj, good time. About permissions and the correct proportions of images for panorama, Max and Anton mentioned in the comments to the article, and what to do .... I advise you to read this post ๐Ÿ™‚ rid of strabismus and myopia in their panoramas: the D http: // renderstuff.com/360-panorama-3dsmax-tutorial-133/#206


6 Mar, 2012 serjjj
14 Mar, 2012 # Re: Creating transition points in the virtual tour
! Ok Thank you, Denis now count๐Ÿ˜


6 Mar, 2012 serjjj
14 Mar, 2012 # Re: Creating transition points in the virtual tour
The boys and tell me again, how and in what format correctly loaded tours to the site? At a resolution of 6000h3000 it is impossible to make such legche.Odna panorama view I weighs 10 mb. So it turns out: a tour of 5 of these panoramas weighs 50 mb. converts it into a format swf.v Tourweaver program loaded on a paid hosting, get the code, paste it on your website and to view the tour waiting for half an hour until he zagruzitsya.A tours on other sites loaded in moment.Podskazhite please that I do not and how to do better? Thanks!


13 Mar, 2012 Denis
14 Mar, 2012 # Re: Creating transition points in the virtual tour
Serjjj, you need optimizorovat quality files in a graphical editor, for example, in Photoshop CS, there is such a special option "for WEB sohranenine devices" if you use it in my work then see the screens below. In the window you can save the trace as a different file size before optimization and after, respectively, 22.9 and 524.3 MB KB to optimize jpeg format๐Ÿ˜‰. There are also specially sharpened by optimizing a program, I will not impose anything, since I use Photoshop only, but google you nobody forbids๐Ÿ˜.


20 May, 2013 Valerie
20 May, 2013 # Re: Creating transition points in the virtual tour
Hello everybody! According to the lessons on this site made the panorama room. Prompt please, in what program "glue" is best obtained? familiarizing Pano2QTVR, see what happened only with Quick Time. By this there is the question. For example how to connect with other rooms in the same virtual tour? Please explain how to do it all in the mind is! thank you in advance!


20 May, 2013 Valerie
21 May, 2013 # Re: Creating transition points in the virtual tour
Your site has a great tutorial on how to render the panoramic image and get out of it the panorama program. Everything turned out fine, until we reached the transition point. But how to create a full virtual tour of several panoramic images premises? And how to create a point of transition between rooms? Use of the program Pano2QTVR Gui. Tell someone that knows, maybe some advise program ๐Ÿ™‚


31 May, 2013 Mariya
31 May, 2013 # Re: Creating transition points in the virtual tour
Tell me where to buy the full version Pano2QTVR pro? The site asked letters any write ..


25 Jun, 2013 vasili
25 Jun, 2013 # Re: Creating transition points in the virtual tour
Maria, download a program Pano 2vr version 4, and type in the YouTube tutorials on creating 3d tours through this program, there is in the video explains everything in detail, though in English, just look where and what options selects the speaker behind the scenes ๐Ÿ™‚


17 Jul, 2013 Oleg Pak
17 Jul, 2013 # Re: Creating transition points in the virtual tour
Good afternoon. Such a problem. I create a point of transition that sends a page on the Internet. In preview mode it works. After the ferry links in flash does not work tell me how to fight?


10 Dec, 2013 E.V.A.
10 Dec, 2013 # Re: Creating transition points in the virtual tour
Hello, thank you for the lessons and responses. Tell me what software to choose and easily move from room to room was to set up and maintained in one file and even in the "exe" format instead of "swf". and a file format suitable for IOS? thank you in advance for your response


10 Dec, 2013 Usco (3d modeling expert)
10 Dec, 2013 # Re: Creating transition points in the virtual tour
EVA hello. You have 2 options: Pano2VR (no frills) or KRPano (the most fancy of existing ones). Both paid, export support for various platforms and self-starting projects (they are converted into the desired format): Windows, Mac, Linux, iPhone (IOS), iPad, Android, ... Find and read about them here: http:// ggnome.com/ http://krpano.com/ examples of their work and specially created for discussion can be found on the Internet in both English and Russian.


3 Oct, 2015 Aleksey
3 Oct, 2015 # Re: Creating transition points in the virtual tour
Guys Hello! Really need your help. The client asks to make a virtual tour of the rooms. He sat on the forums about the principle of understand, but do not understand one thing. Look, it's a bridal salon with large rooms, making them separately and each room is packed with models of the eyeballs. How to make the transition from one room to another? We need two rooms in one project download? But then the viewport does not turn in the project. How to be ?? ((


Add a comment

Name:  


Anti-spam challenge (please check if you agree with this and uncheck if not)
Yes, I am a spam-bot.
Yes, I am a human.
Terms of Service

RenderStuff ยฉ 2008