How to paint the walls of particular room?

🤖
25 Mar, 2013 Svetlana
25 Mar, 2013 # Re: How to paint the walls of particular room?
I made the wall with the help of a spline and Extrude modifier. The house has several rooms. And the wall is built with one room and continue to another (the partition between them). Applying the material to the walls of a room painted a wall in another room. Convert all to Editable Poly, still painted all. To select only one wall of the room for painting?


25 Mar, 2013 gus_ann
25 Mar, 2013 # Re: How to paint the walls of particular room?
Hello, you're transferred to poly. Do multi material, it 2 or more submaterial. Appoint the material on their walls. You go to the editing of polygons mode on a combination Clavey Cntr + A, stand out all the polygons in the parameters Poligon materials ID expose Set ID 1, you have all the walls will be the first submaterials, then stand out in a mode of polygons desired wall, which must be in a different color, they ID you put 2 (second submaterial), and so can be taken apart brick by brick, and all the material on the slopes, etc.


25 Mar, 2013 Svetlana
25 Mar, 2013 # Re: How to paint the walls of particular room?
Hello! During this Council thanks. It applies obtained. But I have a problem in that the partition divides the polygon outer wall into two parts - one part of the polygon obtained in the same room, and the second part - in another room, and then one polygon, and it will be painted in one color. and get to the other walls of the room a piece of color that in the first. Can I somehow from the corner of the room to divide the polygon in half - two independent landfill?


25 Mar, 2013 Svetlana
25 Mar, 2013 # Re: How to paint the walls of particular room?
She found the answer! quick slice - editing of polygons. press and in the corner of the room, including the pre-snap on the tops, draw a line from top to bottom or vice versa. And it happened two separate landfill, which can be painted in different colors!


25 Mar, 2013 Anton (Staff Author)
25 Mar, 2013 # Re: How to paint the walls of particular room?
Hello!

gus_ann says is true. It is necessary to convert the model walls in Poly, making Multi / Sub-Object material, and assign the necessary materials (wall color) at the level of ID. I advise you to read otlinoe discussion of this topic, notably the appointment of materials at the level of ID polygons EditPoly .



25 Mar, 2013 Svetlana
26 Mar, 2013 # Re: How to paint the walls of particular room?
Hello! I can not understand the Set ID to the appointment of color in MultiSub-Object. Hello! Color I knew how to assign and use. But here is how to allocate a specific group of polygons on the number 1 in the Set ID, it is not clear. Take the Box with multiple segments. It turns out that the default 1 belongs to the upper polygons. If I select other I needed (eg two side polygon), and the top is not isolated, then top with them still remain assigned the number 1. When I enter the number 1 in the Selected ID, identifies those 2 side polygon and that I appointed the top too! How to remove unwanted polygons of Set ID?


25 Mar, 2013 gus_ann
26 Mar, 2013 # Re: How to paint the walls of particular room?
Svetlana, you are probably confusing Set ID with smoothing groups, which are located just below and look for the "menu". Nothing complicated at all: 1. Make your walls. 2. Move all the walls in the poly, create a Multi / Sub-Object material, and appoint him to the wall 3. You go to landfills card, selects all polygons, Set ID you put 1 after which all polygons become the first submaterials 4. highlights other ground, you put him to Set ID 2 after which he repainted 5. And so on ...


25 Mar, 2013 Svetlana
26 Mar, 2013 # Re: How to paint the walls of particular room?
Wow, everything is so simple! I thought you can not apply color to color. Thank you very much!


6 Dec, 2013 tatyana
6 Dec, 2013 # Re: How to paint the walls of particular room?
I have a slightly different problem - for some reason on one wall texture is applied correctly, but on the other - no. Applied UVWmap c feys to fit, do not get in other embodiments. I bet, I bet - nothing happens! Help me please!!!


8 Dec, 2013 Ilya_sp
8 Dec, 2013 # Re: How to paint the walls of particular room?
Tatiana, try to write more specifically what you're doing, and what does not work. Preferably with pictures. Because the question: "All wrong, what am I doing wrong?", The answer is: "You're doing everything wrong, everything just does not work." You can not give specifics on the abstract question.


Add a comment

Name:  


Anti-spam challenge (please check if you agree with this and uncheck if not)
Yes, I am a spam-bot.
Yes, I am a human.
Terms of Service

RenderStuff © 2008