3d models Range hoods collection


3d models range hoods falconi collection

Mnh range hood 3d model Anc range hood 3d model Als range hood 3d model Opt range hood 3d model Cnc range hood 3d model Edg range hood 3d model Emp range hood 3d model Arc range hood 3d model Hsl range hood 3d model Ftr range hood 3d model Arr range hood 3d model Alm range hood 3d model Fcs range hood 3d model Cpt range hood 3d model Bgr range hood 3d model Smr range hood 3d model Wlc range hood 3d model Atc range hood 3d model Ats range hood 3d model Slp range hood 3d model

Hello to all fans of interior 3d rendering, novices and pros.

This is the collection by which we tried to fill the gap that has long existed in 3d models of kitchen appliances collections. How many teams, how many titles and collections exist, but none of them has in sufficient quantities such an important and beautiful 3d render attribute of any modern kitchen, as a stylish and typical glass-aluminum range hood. Only the most advanced 3d brands rarely presented a quite a simple model of such an important kitchen appliance.

Falconi range hoods are a collection of 3d models of beautiful design metal cooker hoods, mainly for modern Hi-Tech Interiors. However, do not limit yourself in their using. Those who are faced with 3d visualization of the classical interior, is well aware that in the vast majority of classical kitchens the whole metal part of the hood is almost completely closed by facade-style housing. The such façade in the style of entire kitchen covers the much part of the extractor hood 3d mode and let us see only its lower technological part hanging over the cooking surface. Falconi kitchen exhaust collection consists of detailed 3d models, from the general form and to the technical side, through which the air is aspirated for its cleaning in the real-world electric chimney. Also at each cooker vent has visible Integrated lighting. That is what will allow you to easily use any part of hoods for your needs, including the use of wall-mounted hood as the built-in hood. All you need to do is to put the hood of the desired shape into present kitchen unit housing facade.

To simulate the glow of built-in 3d model lamps, the most realistic effect can be achieved by placing the inside of each the photometric light source with the corresponding IES file that will give beautiful shaped pattern of light on the working area.

Each Falconi fume extractor was rendered in a separate studio with the best angle and lighting to highlight its forms and details. Nevertheless, these 3d models might look even better on your rendering. It is needs to be understanded that the appearance of metal and glossy surfaces of the hoods case is, in fact, the reflection of the interior where they are.

This collection contains two types of cooking canopies, the wall-mounted and island ones. The main difference between some of the others in that wall-mounted hoods, judging from their names, are attached by the back to the wall, and the island hoods can be used in the middle of the room over the kitchen island modules. The actual island hood is attached directly to the ceiling. All hoods have telescopically retractable cover to hide the ventilation duct. To get the cover of any height, it's enough just to enter the edit mode of a model and pull up the corresponding points on the Z axis. The specific mapping of metal will not change for the worse when you are stretching of individual polygons of 3d model.

On average kitchen, the range hood is just an electromechanical device designed to clean the air from burning, smoke and odors. However, a truly beautiful shapely hood can become a shining star in the kitchen, engage the attention and focus the viewer’s eye on the exquisite taste of interior designer. It becomes the one of the main items that decorate the interior. It is for this purpose we have created the Falconi range hoods 3d models collection.

Emp range hood 3d model

Emp range hood 3d model

Solid shaped dome hood. Clear and sharp angles make it look like an Egyptian pyramid, especially in the lower part. At the bottom of the hood is a rectangular filter grid. On both sides of this mesh are the built-in halogen lamps. The top of the base is cut obliquely. It allows the interior be beautifully reflected in hood’s flat shiny metal surface. A high rectangular air duct pipe enclosure raises up from the hood base.



Ftr chimney hood 3d model

Ftr chimney hood 3d model

Wall-mounted kitchen hood in a modernist style. The fume extractor frame is two-story. The lower part is both a technological element of a fume catcher, coming from the hob up the air, and the holder of the built-halogen bulbs. Motorized interior of a hood located inside a cylindrical shape at the center of the construction. The upper part of kitchen hood 3d model is designed as a transparent glass shelve, fastened to the frame mounts coming from the lower part.



Edg extractor hood 3d model

Edg extractor hood 3d model

Aluminum range hood with a light blue neon lights. Outwardly, it looks like an ultramodern studio lamp. The similarity of those used by professional photographers for their photo-studios. The such performance may seem strange, and in particular the question arises – what actually sucks up the air? In practice everything is simple, air leaks in the slot located on the perimeter of the hood dome. Long glow lamps, built-in dome, light the lower part under the hood and top of the wall above it. In the center of hood 3d models cover over the dome is a large black-and-pearl on-button.



Smr kitchen exhaust 3d model

Smr kitchen exhaust 3d model

Minor is a flat rectangular wall-mounted ventilation hood. Futuristic shape makes it akin to a spaceship from the future, recalling a flying saucer with two bright spotlights at the bottom. Recessed lights with round reflectors play the role of spotlights. This kitchen hood 3d model will decorate any ultramodern kitchen rendering.



Arc cooker vent 3d model

Arc cooker vent 3d model

Dome hood with a dome made of tempered curved glass. The glass is attached to the base of hood with four bolts of major size. Despite its massiveness, the whole structure looks rather elegant, thanks to a transparent glass dome. Housing of the actual range hood 3d model is smooth polished steel.



Wlc vantilation hood 3d model

Wlc vantilation hood 3d model

Kitchen hood of a unusual shape. This extractor hood is truly a masterpiece of industrial design. Refinement of the curved shape of its base is indeed charming. Suction grid of a small size hidden behind the front panel and is located near the wall. Before the grid there are three halogen lamps. On the right side of this electric chimney 3d model’s panel is the massive control button in black.



Cnc cooking canopy 3d model

Cnc cooking canopy 3d model

Cooker hood Ictinia is that unusual case, when the appliance is a jewel of the entire kitchen. This is hi-tech sculpture with decorative front panel in the form of a blue sail. This element is made of frosted blue glass. Without a doubt, cooker hood 3d model of this design masterpiece will necessarily prick much attention.



Arr extractor fan 3d model

Arr extractor fan 3d model

Beautiful high-tech range hood with glass panel at the bottom and at the top of exhaust dome. These panels are made of frosted translucent glass, through which you can clearly see the silhouettes of the blue gas-discharge backlight lamps. Horizontally, the dome of hood 3d model is flat, but the frontal part has an arcuate curved shape.



Bgr electric chimney 3d model

Bgr electric chimney 3d model

Domestic kitchen hood with two lamps and a large suction grille. The dome is made in the form of diagonally located apron. Technological cutout in this extractor fan 3d model, to which apron is attached, gives the illusion as if the hood duct is cut into two pieces with a sharp clear glass apron. However, this is only an illusion. Glass has sanded in special way edges and is perfectly safe.



Hsl exhaust hood 3d model

Hsl exhaust hood 3d model

Long metal cooker hood. It is unusual for ordinary kitchen model will be refined and at the same time functional tool for a large country cottage kitchen. On the other hand, it will be a great air filter unit in the interior of the special office kitchen. In the same one, in which cooks prepare breakfast and dinner for many employees. Suction opening is under the yellow overhanging cover. The left part of the hood 3d model is not just for mounting two lamps, but also will provide an excellent shelf for spices.



Fcs range hood 3d model

Fcs range hood 3d model

Vent hood with a smooth, almost flat dome, slightly arched in the center. Equipped with four light bulbs, improving lighting of the hob. The actual shiny case of hood 3d model made of stainless steel. Removable filter grid repeats a small arched curve of the dome. In its right-hand side are aluminum button for controlling the extract’s work.



Cpt cooker hood 3d model

Cpt cooker hood 3d model

3d model of stylish range hood, which has great design and classic shape. It is not simply a device designed to rid house of odors and combustion products, it is also a luxury high-tech element of the interior of the kitchen. In addition, large oblong halogen lamps allow to talk about this model as a significant attribute of kitchen lighting.



Slp chimney hood 3d model

Slp chimney hood 3d model

Beautiful designers construction for the installation over a stove or hob, traditionally located at the wall, in the middle of the kitchen or in a corner. The highlight of this kitchen hood 3d model is a plate of glossy blue glass on top of the dome. Bottom of the pyramid-dome is the exhaust filter, and two round lamps.



Opt kitchen exhaust 3d model

Opt kitchen exhaust 3d model

Wall mounted extractor hood with a dome in the form of Latin letter L. The remaining space of the dome is closed with transparent glass. The asymmetry of the extractor hood 3d model facade makes it a unique design, sharply distinguishing it among other 3d models in collection.



Ats cooker vent 3d model

Ats cooker vent 3d model

Elegant range hood with a rectangular cut in the dome. The cut holds the inserted transparent, slightly greenish glass. The front panel plastic buttons with backlighting simplify the management of hood with subdued lighting in the kitchen, as well as improve the visual indication of operating modes in this kitchen hood 3d model.



Alm kitchen hood 3d model

Alm kitchen hood 3d model

Smooth wall-mounted kitchen hood. Simple and easy design of cooker hood 3d model without the frills. Perfect for those who do not like pretentious forms and requires only strict functionality. Effective performance, in which simplicity of form only emphasizes its functionality.



Atc cooking canopy 3d model

Atc cooking canopy 3d model

Turnici is an island version of the 3d model of a wall-mounted Laridae cooker hood. In essence, the same model, only having the same kind of front and rear parts. Even the location of long-lived halogen lamps is symmetrical.



Mnh extractor fan 3d model

Mnh extractor fan 3d model

Beautiful and attractive tech island hood. Its simple and at the same time strict form involuntarily will focus viewer’s eye on hood’s professional assignment. This is exactly the model that is liked to choose by the maestros of the kitchen cooking. Its streamlined shape the kitchen hood 3d model resembles a sports car bolide. Strict filter grid and four bright halogen lamps emphasize cutting-edge solutions of its industrial design.



Anc fume extractor 3d model

Anc fume extractor 3d model

3d model of island hood Jabula. This is a complete analog of a Phaethon cooker vent, which differs only in the way of fixing. Unlike Phaethon hood, island cooker hood 3d model Jabula is not attached to the wall. It is attached to the ceiling, hanging over a kitchen island with hob.



Als electric chimney 3d model

Als electric chimney 3d model

Minimalistic austere island hood. Has the same self-contained form, as well as near-wall extraction hood Tilopsis. It is equipped not with two, but with four halogen lamps and has a large grid, hiding elements of air filter suction of this kitchen hood 3d model.



3d models of the entire collection are the photo-realistic copies of the actually existing wall-mounted and island cooker hoods.

This 3d model is presented in five formats for maximum compatibility with various computer graphics packages, flexibility and ease of use:

  • 3ds Max 5.0 and higher: [ 3ds Max 5.0 / Standard ] + [ V-Ray MAT ]
  • 3ds Max 2008 with V-Ray: [ 3ds Max 2008 / V-Ray ]
  • Universal Autodesk [ FBX  / Standard ]
  • Universally accepted [ OBJ ] + [ Obj MTL ]
  • Universally accepted [ 3DS / Basic ]

3ds Max 5.0 and higher: [ 3ds Max 5.0 / Standard ] + [ V-Ray MAT ]: Archive with the 3d model file of 3ds Max 5.0 format and MAT-file with 3ds Max V-Ray materials. Ideal for users, who has 3ds Max of almost any version, that is 5.0 and above.

3ds Max 2008 with V-Ray: [ 3ds Max 2008 / V-Ray ]: Archive with the original 3d model file of 3ds Max 2008 format and the V-Ray material. It is a source format and it is designed for users of V-Ray on 3ds Max 2008 and above.

Universal Autodesk [ FBX / Standard ]: Archive with the 3d model file in Autodesk FBX universal format with the standard internal materials. It is handy for use in most Autodesk applications and in the few others.

Universally accepted [ OBJ ] + [ Obj MTL ]: archive with 3d model file in a generic Wavefront OBJ format and external obj material MTL file. This format allow the easy use of this 3d model as a three-dimensional clipart in various applications, especially in those that have limitations of the 3d technologies such as in the 2D raster editor Photoshop.

Universally accepted [3DS / Basic ]: archive with 3d model file in a generic 3d studio max 3DS format with the internal basic materials. This format allow the easy use of this 3d model as a three-dimensional clipart in various applications, especially in those that have limitations of the 3d technologies such as in the 2D raster editor Photoshop.

All textures are in a separate archive containing all the textures for all the 3d models of the entire collection. So, before you import the model into your software, do not forget to put the desired textures in prepared folder, thus selecting only those that are used in materials of specific model.