Stained or engraved glass with V-Ray

🤖
14 Oct, 2012 Corsair
14 Oct, 2012 # Re: Stained or engraved glass with V-Ray
Hello! Please help us to make stained glass in the windows and colored shadows from them. I make a composite material made of colored transparent glass, and as a result, getting the blind window and, of course, no falling colored teney.Otdelno of boxing does plain glass, all is well, but the stained glass rising from the spline translate into Editable Poly and ku ku, the third day of agony.


14 Oct, 2012 Anton (Staff Author)
14 Oct, 2012 # Re: Stained or engraved glass with V-Ray
Hey, if we talk about the proper stained glass, its geomitriya too should be correct, that is, you need to take and models of glass, glazing beads, etc., of course, to appoint all the necessary materials to get a true picture. As for the shadows, then the glass material must be checked Affect shadows. Then it will be a beautiful and stained glass, colorful and shadow😉


26 Jan, 2013 gus_ann
26 Jan, 2013 # Re: Stained or engraved glass with V-Ray
Hello, faced with a problem for me nepreodalimoy Stained Glass. No colored bunnies on the floor, though burst! Prompt, whether the option of stained glass with a pattern through texture is possible, rather than geometry? And what to do with this glass - to exclude from the lighting and shading of the light source or not?


14 Oct, 2012 Anton (Staff Author)
4 Feb, 2013 # Re: Stained or engraved glass with V-Ray
Hello! You just turn on the Affect shadows, as I recommended earlier and put on the appropriate model of stained glass texture of many colors, but you most importantly in refrakshen put it to himself refrakshen was colorful. Then the shadow / skylight will multicolored him. Also, if you have a bunny because of glare on the floor, then they should be the same from what -That. That is, the window must be sent direct bright light. For example, a standard Target Direct without attenuation (Decay: None).


26 Jan, 2013 gus_ann
4 Feb, 2013 # Re: Stained or engraved glass with V-Ray
Thank you, Anton, it worked! And in geometry: and through the texture: However, it should of course still adjust the cone of direct lights, ceiling cornice and began to shine, but it is a trifle. The challenge was to put the stained glass window in the door of the dressing room and walk-in closet highlight it.


5 Feb, 2013 Ilya
5 Feb, 2013 # Re: Stained or engraved glass with V-Ray
Sorry for offtopic. Gus_ann Offline seen your renerengi and all wanted to ask, how do you manage to create such realistic materials. Every time you create them znanovo or shake your workpiece (eg online-material.de Wray) and is simply adjusted to the your interior? Just curious to know how the others, because the novice is difficult to remember all the materials settings (blend, falloff, noise, 2side). I look at your floor materials and wallpapers - this is not just some diffyuz, Reflect and bump. How did you configure them as realistic, and most importantly how do you get setup? Or do you simply memorize all the values ​​from the other scenes (such as downloaded - arkinteriors from evermoshon)?


26 Jan, 2013 gus_ann
5 Feb, 2013 # Re: Stained or engraved glass with V-Ray
Ilya, hello, create a theme about how to set the materials in-Ray the V , I'll answer it, but I'm afraid RS will swear!


10 Apr, 2013 Anya
10 Apr, 2013 # Re: Stained or engraved glass with V-Ray
Hello. I do the sauna salt bricks, on the basis of the stained glass, but it was too strong light intensity. Although from the outside does not backlit, can anyone knows how to remove this intensity. I will be very grateful.


14 Oct, 2012 Anton (Staff Author)
10 Apr, 2013 # Re: Stained or engraved glass with V-Ray
Hello! As long as you do not post your refreshment image renderings, setting, scene, etc. the phrase "on the basis of the stained glass brick" and "a strong light intensity is" not about what do not speak.


16 Feb, 2014 Svetlana
16 Feb, 2014 # Re: Stained or engraved glass with V-Ray
If I put a picture on Refrakt-stained, then there is a colored glow, everything is beautiful, but totally lost transparency. Whether it is possible to fix something, or am I doing something wrong, and transparency should be? And, yes, thank you for your explanations about General Settings.


3 Aug, 2014 mira99
3 Aug, 2014 # Re: Stained or engraved glass with V-Ray
Hello. Tell me how you can do engraving on the glass in vray. Needless glass blue in it a white outline whether vray blend risunok.Pomozhet? or are there other options?


26 Jan, 2013 gus_ann
3 Aug, 2014 # Re: Stained or engraved glass with V-Ray
mira99, hello. vray blend will help as a texture with the desired engraving. Well, the way to create geometry through this glass also can not dismiss.


Add a comment

Name:  


Anti-spam challenge (please check if you agree with this and uncheck if not)
Yes, I am a spam-bot.
Yes, I am a human.
Terms of Service

RenderStuff © 2008