Free 3d model of a stylish wall lamp. It is made in the form of half-cup, fastened to the wall. The lamp is ceramic. Its lower part is covered with gold, specially worn antique. At the top of the bowl the image is an old picture. Lamp itself does not have transparent parts, which let the scattered light pass. Light comes out of its upper part, illuminating the wall and part of the ceiling. Thus, the light draws a vivid pattern on the wall, like a flame, and through this, it illuminates the room with a soft diffused light, slightly stained in the shade of the wall covering.
Working lamp visually almost completely copies of ancient Greek bowl with burning oil, while being modern and completely secure appliance. Electric cable, supplying power to the lamp fixed on the premade groove into the wall and sealed with wall coverings. This 3d model will be a wonderful decoration of a hall or corridor. This 3d model can be used for both practical and the purely decorative lighting of the interior. Keep in mind that in the case of practical illumination, light from the lamp is not direct, but reflected from the walls and is a global illumination. To simulate a bright glow inside the 3d model, you should establish a spherical light source with a slightly yellowish tone, for example VRayLight in Sphere mode. In renderer other than the V-Ray, of course, you should use a similar effect on light. Its brightness should be selected in accordance with the exposition setting of the scene, in which it is used.
Modeled in 3ds Max 2008. Rendered with V-Ray.